Aperflux 851 is one of the pilot-operated gas pressure regulators by Pietro Fiorentini.This device is suitable for use with previously filtered non-corrosive gases, and it is mainly used for high-pressure transmission systems and for medium pressure natural gas distribution networks.According...
Pilot-operated pressure regulator produced by Pietro Fiorentini, Dixi AP is suitable for use with previously filtered non-corrosive gases.It is mainly used for high-pressure transmission systems and for medium pressure natural gas distribution networks.According to the European Standard EN 334, it...
Reflux 819 is a pilot-operated gas pressure regulator. It is particularly suitable for high-pressure transmission systems and for medium pressure natural gas distribution networks, and it can be used with previously filtered non-corrosive gases. According to the European Standard EN...
Reflux 819/FO is a pilot-operated gas pressure regulator classified as Fail Open according to the European Standard EN 334. Its use is strongly recommended in high-pressure transmission systems and in medium pressure natural gas distribution networks. It is suitable for...
Dival 160 AP by Pietro Fiorentini is a direct-operated gas pressure regulator controlled by a diaphragm and contrasting regulated spring action. Classified as Fail Open according to the European Standard EN 334, it can be used with previously cleaned gaseous...
Staflux 185 is a direct-operated gas pressure regulator controlled by a diaphragm and contrasting regulated counter pressure action. This device is particularly suitable for high-pressure transmission systems and for medium pressure natural gas distribution networks. It can be used with...
Staflux 187 is a direct-operated pressure regulator controlled by a diaphragm and contrasting regulated counter pressure action. It can be used with previously filtered non-corrosive gases and is particularly suitable for high-pressure transmission systems and for medium pressure natural gas...
Staflux Mini is a direct-operated pressure regulator controlled by a diaphragm and contrasting regulated counter pressure action. Mainly used for high-pressure transmission systems and for medium pressure natural gas distribution networks, it can be used with previously filtered non-corrosive gases....
Aperval is a pilot-operated gas pressure regulator. Particularly suitable for medium and low pressure natural gas distribution networks, it can be used with previously filtered non-corrosive gases. It is classified as Fail Open according to the European Standard EN 334....
Pilot-operated gas pressure regulator by Pietro Fiorentini, Dixi is suitable for use with previously filtered non-corrosive gases. It is mainly used for medium and low pressure natural gas distribution networks. According to the European Standard EN 334, it is classified...
Reval 182 is one of the pilot-operated gas pressure regulators by Pietro Fiorentini. This device is suitable for use with previously filtered non-corrosive gases, and it is mainly used for medium and low pressure natural gas distribution networks. According to...
Pilot-operated gas pressure regulator by Pietro Fiorentini, Terval/A is suitable for use with previously filtered non-corrosive gases. It is mainly used for medium and low pressure natural gas distribution networks. According to the European Standard EN 334, it is classified...
Dival 500 by Pietro Fiorentini is a direct-operated gas pressure regulator controlled by a diaphragm and contrasting regulated spring action. Suitable for use with previously filtered gaseous fluids, it is mainly used for medium and low pressure natural gas distribution...
Direct-operated gas pressure regulator controlled by a diaphragm and contrasting regulated spring action, Dival 507-512 is suitable for use with previously filtered gaseous fluids. Its use is strongly recommended in medium and low pressure natural gas distribution networks. According to...
Dival 600 is one of the direct-operated gas pressure regulators controlled by a diaphragm and contrasting regulated spring action by Pietro Fiorentini. Mainly used for medium and low pressure natural gas distribution networks, it ca be used with previously filtered...
Direct-operated gas pressure regulator controlled by a diaphragm and contrasting regulated spring action, Dival 700 is suitable for use with previously filtered non-corrosive gases. Its use is strongly recommended in medium and low pressure natural gas distribution networks. According to...
Norval by Pietro Fiorentini is a direct-operated gas pressure regulator. Suitable for use with previously filtered gaseous fluids, it is mainly used for medium and low pressure natural gas distribution networks. It is classified as Fail Open according to the...
The HP 100 by Pietro Fiorentini is a spring loaded gas pressure regulator controlled by a diaphragm and contrasting regulated spring action. Mainly used for medium and low pressure natural gas distribution networks, as well as commercial and industrial applications....
The FE is a two-stage gas pressure regulator for low pressure equipped with integrated slam shut (OPSO), and optional excess flow valve (EFV) which enable UPSO and fire protection valve. It is particularly suitable for low pressure natural gas distribution networks for residential and...
The FEX is a two-stage gas pressure regulator for low pressure equipped with integrated slam shut (OPSO and UPSO), and optional fire protection valve. It is particularly suitable for low pressure natural gas distribution networks for residential and commercial users. It should be used...
The governors STD with and without filter with double safety diaphragm in the Pietro Fiorentini range are equipped with a balanced device. They represent the ideal solution for supplying burners. They can be used with previously filtered non-corrosive gases and...
The butterfly valve BF 31 is an interception device able to guarantee low pressure losses. It may be used also for intercepting liquids when a hermetic seal, low pressure losses and compact construction in the flow direction are required. Suitable...
The butterfly valve BF 32 is an interception device able to guarantee low pressure losses. It may be used also for intercepting liquids when a hermetic seal, low pressure losses and compact construction in the flow direction are required. Suitable...
In the floating valve by Pietro Fiorentini the ball is not rigidly held on its rotational axis and so is free to float between seats. Sealing is achieved by the action of the pressure, which pushes the ball against a...
The ball of the floating valve by Pietro Fiorentini is mounted on a trunnion which supports the pressure load. The seats are spring energized and the body construction is one piece, made by forging or casting. The ball is inserted...
The control ball valve Deltaflux by Pietro Fiorentini is the ideal solution for all fluid control applications where high differential pressure or great flow rates are involved.The refined design of the rotating trim allows simultaneously high flow rate coefficients Cv...
Reflux 919 by Pietro Fiorentini is a control diaphragm valve especially designed for natural gas or other preliminarily filtered non-corrosive gases. It may be supplied in the direct-action (air to close), or in the reverse action type (air to open)....
VLM valve by Pietro Fiorentini is a bypass and throttling device characterized by a soft insert on the valve seats for better tightness and a balanced shutter for easier opening and closing. The top-entry body is suitable for flanged coupling. ...
The Synchroflux regulating valve by Pietro Fiorentini is a bypass and throttling device is characterized by a soft insert on the valve seats for better tightness and a balanced shutter for easier opening and closing. It has a top-entry body...
The slam shut valve SBC 187 by Pietro Fiorentini is a safety device which immediately intercepts gas flow when the pressure it is monitoring reaches a pre-set limit due to any anomaly in the system, or when enabled manually. Mainly...
The slam shut valve SBC 782 by Pietro Fiorentini is a safety device which quickly intercepts gas flow when the pressure it is monitoring reaches a pre-set limit due to any anomaly in the system, or when required by the...
The slam shut valve SBC Mini is one of the safety devices by Pietro Fiorentini that are suitable for use with natural gas and previously filtered non-corrosive gases. Its use is strongly recommended for high-pressure natural gas transmission systems and...
The slam shut valve HBC 975 by Pietro Fiorentini is a safety device which quickly intercepts gas flow when the pressure it is monitoring reaches a pre-set limit due to any anomaly in the system, or when required by the...
The slam shut valve SCN by Pietro Fiorentini is a compact safety device which quickly intercepts gas flow whenever the pressure under monitoring reaches a pre-set limits, or whenever manually required by operator on-site or through a remote command (optional...
The slam shut valve Dilock by Pietro Fiorentini is a safety device which quickly intercepts gas flow when the controlled pressure reaches a pre-set limit due to any anomaly in the system, or when required by the operator at the...
In the pilot-operated relief valve PVS 782 by Pietro Fiorentini, the opening and the closing of the main plug is controlled by a pilot device which is very sensitive to the variations of the in-line pressures. Particularly suitable for high-pressure...
PVS 803 is the pilot-operated relief valve by Pietro Fiorentini in which the opening and the closing of the main plug is controlled by a pilot device which is very sensitive to the variations of the in-line pressures. Mainly used...
The direct-operated relief valve VS/AM 58 by Pietro Fiorentini is a safety device which vents gas when the system pressure exceeds the set value due to temporary events, such as expansion due to rise in gas temperature or downstream pressure...
Direct-operated relief valve, VS/AM 65 by Pietro Fiorentini is a safety device which vents gas when the system pressure exceeds the set value due to temporary events, such as expansion due to rise in gas temperature or downstream pressure shocks...
The HFA - HFB by Pietro Fiorentini is a dry gas filter which can be used with natural and manufactured gas, air, propane and other non-aggressive gases. This device is mainly used for high-pressure transmission systems and for medium...
The RS 2,4 mechanical gas meter by Pietro Fiorentini is designed in conformity to high accuracy and reliability standards. The metering cartridge determines the meter accuracy, and it is submitted to several and strict quality control procedures during the whole...
RS 2001 LA is a mechanical gas meter by Pietro Fiorentini designed in conformity to high accuracy and reliability standards. The metering cartridge determines the meter accuracy, and it is submitted to several and strict quality control procedures during the...
Designed in conformity to the highest accuracy and reliability standards, the MM mechanical meter range by Pietro Fiorentini is charaterised by the zinc-coated steel plate external case. Its high accuracy is determined by the metering module, which is submitted to several and...
The RSE smart meter by Pietro Fiorentini come from the integration of traditional gas meters with new generation electronic module.The transmission from the measuring group to the electronic board is carried out by a high-technology interface, made upon an efficient...
The SSM-iCON smart meter by Pietro Fiorentini incorporates the latest ultrasonic technology to measure gases plus a variety of network connectivity options. It is equipped with a valve which can be triggered by remote or locally upon specific events, like...
HM is the smart meter by Pietro Fiorentini which combines the new generation electronic features with a diaphragm metering unit. The mechanical register is replaced by an electronic totalizer equipped with a data transmission device and a remote firmware upgrade...
Designed to measure gas velocity, the IMTM turbine meter by Pietro Fiorentini incorporates an innovative method of conditioning flow in the meter body, within which a straightening section aligns the gas flow by removing undesired swirls and turbulence before they...
Approved for use in fiscal measurement, IM-RM is the rotoid meter by Pietro Fiorentini characterized by constant and repeatable accuracy. It is mainly used in high-pressure transmission systems and in medium and low pressure natural gas distribution networks. It can...
FioSonic, the Ultrasonic Flow Meter for gas transmission networks, completes Pietro Fiorentini range of products dedicated to the industrial sector.With its multi path-chordal technology, it provides real time diagnostics, high accuracy and redundancy for fiscal gas flow measurement. Suitable for...
The stream of natural gas spans from the wellhead to the doorstep of each single end user, and the first task of each company operating along this path is to grant safety in each step. Ensuring a reliable gas transmission...
KSI standard design has been developed by Pietro Fiorentini to preheat upstream gas regulation sections, in order to compensate cooling due to Joule Thomson effect. The standard design is based on a vertical BEU configuration with gas flowing through the...
In gas purification, membranes are used to separate components in natural gas such as water, CO2 and hydrocarbons according to their permeabilities. Each gas component entering the membrane unit has a characteristic permeation rate that is a function of its...
Based on the principle of controlled injection of odorizer, Dosafit is the electronic odorizing system by Pietro Fiorentini that relies on gas pressure instead of relying on separate injection pumps.Dosafit is usually paired with OLF, the lapping odorizing system that...
CNG daughter station brings the advantage to provide gas in areas where pipelins are not present, keeping unchanged the safety and reliability of the system in order to respect all the international standards.CNG daughter stations can work with a maximum...
Thanks to their capillarity, gas distribution networks are the perfect destination to collect decentralized renewable gas production, such as biomethane. However, in some periods of the year, the distribution network is not able to absorb the entire quantity of renewable...
Agricultural by-products, urban organic wastes, sludge from water purification and industrial residues are moving fastly toward environmental sustainability, transforming waste into resource: renewable energy.Thanks to Pietro Fiorentini's biogas upgrading solutions, contaminants and inert substances that lower calorific value are eliminated...
With the injection of biomethane into the grid, the gas system assumes another nature: it becomes renewable. To let this happen, before network injection, biomethane must pass through gas quality, metering, treatment, compression or pressure regulation and eventually odorization.We provide...
Measurement, biomethane quality and automation ensure the safety of liquid biomethane end user, and allow a metrological assessment of its energy content, granting the subsidy for the Bio-LNG producer.Pietro Fiorentini analysis and measurement system are precisely designed according to the...
Hydrogen is finally granting a key role in the energy arena. It is a precious molecule with the property of being easily produced from renewable power and representing a complementary solution to other green gases and to electrification process, especially...
Carbon dioxide capture is the process of capturing carbon dioxide emissions from various industrial processes and preventing them from being released into the atmosphere. This technology helps mitigate greenhouse gas emissions by avoiding the CO2 emission and its impact on...
Wind and solar power are having an increasing role in power production. Due to their own nature, they cannot be scheduled. Energy storage will become a priority to balance renewable production and energy demand.In this context, power-to-gas will play a...
Pietro Fiorentini's service field engineering teams conduct full site surveys and provide conditions reports for all equipments installed in the plant.Site surveys also includes reviews of customer training needs and spare stock levels recommendation.
Handling natural gas demands high levels of knowledge. Mechanics, physics, together with regulations and laws are just a part of the required know-how for gas professionals on whose tasks depend the safety of all communities around the world.Pietro Fiorentini, thanks...
Pietro Fiorentini provides tailored courses to its customers, adapting the training programs to specific requirements. These courses are specifically designed by our Training Department together with the customer to develop a focused learning path in accordance with the specific professional...
Pietro Fiorentini After Sales Department provides original and high quality spare parts support service ready for a fast delivery all over the world, together with a dedicated technical service to help the customer finding the right replacement for every need....
When applied on smart meters GSM/GPRS and NBIOT band 20 and 8, Pietro Fiorentini Passive Repeater is an interesting solution to empower the comunication signal. It is suitable for applications in areas where the communication between the smart meter and...
The new designed residential gas meters RS/2.0 and RST/2.0 completing Pietro Fiorentini‘s range of Diaphragm Gas Meters, fulfilling highest requirements for measurement accuracy and endurance performance. RS/2.0 measures the gas volume at ambient condtions, RST/2.0 measures the temperature compensated gas...
The Aperval H is one of the pilot-operated gas pressure regulators designed and manufactured by Pietro Fiorentini. This device is suitable for 100% hydrogen applications. It is used in medium and low-pressure gas distribution networks. It is classified as Fail Open according to the European Standard...
The Dival 500 H by Pietro Fiorentini is a lever-operated gas pressure regulator controlled by a diaphragm and contrasting regulated spring action. This device is suitable for 100% hydrogen applications. It is used for medium and low pressure gas distribution...
The Dival 507-512 H by Pietro Fiorentini are a lever-operated gas pressure regulators controlled by a diaphragm and contrasting regulated spring action. These devices are suitable for 100% hydrogen applications. They are used for medium and low pressure gas distribution...
Dival 600 H is part of Pietro Fiorentini’s range of direct-acting gas pressure regulators with diaphragm control and spring contrast. This device is suitable for 100% hydrogen applications. It is used in medium and low-pressure gas distribution networks. It is...
The Norval H by Pietro Fiorentini is a direct-operated gas pressure regulator. This device is suitable for 100% hydrogen applications. It is used in medium and low-pressure gas distribution networks. It is classified as Fail Open according to the European...
The hydrogen electrolyser of Hyter, a company part of the Pietro Fiorentini Group, uses the advanced AEMWE technology (Anion Exchange Membrane Water Electrolysis) to produce high-purity hydrogen in a sustainable way. This device is modular, easy to install and configure,...
Reflux 819 H is a pilot-operated gas pressure regulator designed and manufactured by Pietro Fiorentini, suitable for 100% hydrogen applications. It is mainly used for high-pressure transmission systems, power plants and for medium pressure gas distribution networks. According to the...
Reflux 819/FO H is a pilot-operated gas pressure regulator designed and manufactured by Pietro Fiorentini. This device is suitable for 100% hydrogen applications. It is mainly used for high-pressure transmission systems, power plants and for medium pressure gas distribution networks....
Staflux 187 H is a direct-operated gas pressure regulator designed and manufactured by Pietro Fiorentini. This device is suitable for 100% hydrogen applications. This device is the natural evolution of the Pietro Fiorentini know-how and experience in the gas industry....
The Mod. FE H is a direct-operated gas pressure regulator designed and manufactured by Pietro Fiorentini. This device is suitable for 100% hydrogen applications. It is used for low pressure gas distribution networks, as well as residential and commercial applications....
SBC 187 H is a safety device, also called slam shut valve, suitable to quickly interrupt the gas flow when the pressure reaches a calibration set value. This device is suitable for 100% hydrogen applications and it is mainly used...
SBC 782 H is a safety device, also called slam shut valve, suitable to quickly interrupt the gas flow when the pressure reaches a calibration set value. This device is suitable for 100% hydrogen applications. It is mainly used in...
The VS/AM 58 H by Pietro Fiorentini is a relief valve which vents gas when the system pressure exceeds the set value due to temporary events. During noflow conditions, thermal expansion of the gas can cause downstream static pressure to...
The VS/AM 65 H by Pietro Fiorentini is a relief valve which vents gas when the system pressure exceeds the set value due to temporary events. During no-flow conditions, thermal expansion of the gas can cause downstream static pressure to...
The H2-SSM smart meter by Pietro Fiorentini incorporates the latest ultrasonic measurement technology to measure both natural gases and 100% hydrogen, switching between gases without any additional interaction. Built with a valve inside the meter which can act as Excess...
The H2-SSM-iCON smart meter by Pietro Fiorentini incorporates the latest ultrasonic measurement technology to measure both 0 to 20% hydrogen blended natural gases and 100% hydrogen, switching between gases without any additional interaction. Built with a valve inside the meter...
IM-RM H rotary meters are used in gas distribution systems, compressor stations, and end users such as chemical and processing plants. This device is suitable for 100% hydrogen applications. It is the natural evolution of the Pietro Fiorentini know-how and...
IMTM H turbine meters are designed for custody transfer applications, they are mainly used for high-pressure transmission systems, power plants, heavy industry and for medium-low pressure gas distribution networks. This device is suitable for 100% hydrogen applications. It is the natural...
SSM-Aquo M-Bus + LoRaWAN is a remote-reading ultrasonic water meter with integrated communication module, offering a compact design for the residential sector. Using static technology, it has no moving parts subject to wear and tear, and guarantees constant high accuracy...
The variety of skills inherent in a biomethane upgrading and injection system, and the plurality of subjects involved, make service the crucial point of our solutions. Our qualifications range from inspections, metrological checks and maintenance interventions to the running of...
Pietro Fiorentini is been designing, manufacturing and installing solutions along the gas stream for more than 80 years. With production plants all over the world, Pietro Fiorentini's Smart Meter production plant is located in Rosate, near Milan. With an area...
Biogas cryo upgrading is a process that enhances the quality and purity of biogas, derived from organic waste materials, to produce a high-quality biomethane fuel. Cryogenic technology separates carbon dioxide from the gas, resulting in a stream of liquid...
Biomethane liquefaction is the process of converting biomethane, a gas obtained from biogas upgrading, into liquefied biomethane. Biomethane liquefaction allows for efficient storage, transportation, and distribution of this valuable resource through the so-called virtual pipeline, as an alternative mode to...
CO2 liquefaction is the process of converting gaseous carbon dioxide into its liquid form, making it a versatile and transportable resource. This transformation allows for efficient storage, transportation, and utilisation of CO2 in various applications. CO2 liquefaction plays a crucial...
Thanks to the high filtration capacity of the cartridges and their broad surface, the cartridge filters by Pietro Fiorentini allow separation of both dust and solid particles. Suitable for use with natural gas, LPG and non-corrosive gases, these devices are mainly used...
The BLD 211 flow signalling valve is used in all cases requiring the signalling of discharge phenomena of safety devices (overflow valves, pilot relief valves, pilot-operated safety valves, accelerator discharge for monitor intervention, etc.). Applicable for natural gas and all non-aggressive...
The CF/14 is the Pietro Fiorentini’s filter used to protect the pilot circuit of natural gas pressure regulators and instrumentation. It is mainly used to remove solid contaminants generated under certain pressure and temperature conditions, leading to the pilot circuit’s clogging. CF/14 helps to increase...
The pilot series 200/A is a mechanical device which enables the working principle and the setpoint modifications of pilot operated gas pressure regulators. The pilot is optimized to enhance the accuracy and minimize the lock-up performances. According to the European Standard, it is...
The pilot series 300/A is a mechanical device which enables the working principle and the setpoint modifications of pilot operated gas pressure regulators. The pilot is optimized to enhance the accuracy and minimize the lock-up performances. It can be used with the...
The pilot series 210/A is a mechanical device which enables the working principle and the setpoint modifications of pilot operated gas pressure regulators. The pilot is optimized to enhance the accuracy and minimize the lock-up performances. This model specifically allow to have...
The HM-iCON is a smart meter with hybrid technology for commercial and light-industrial applications. The HM gas meters series are designed and manufactured to meet the most stringent requirements of the European Natural Gas Distribution industry.
Our Technical Assistance Service can install, maintain and repair the Pietro Fiorentini equipment, either in our workshop or at our customers’ facilities. We have a team of specialised technicians with many years of experience and great knowledge of our equipment, who provide a personalised after-sales service.
LDB171 is a new silencer option for Reflux/Reval regulators. The silencer LDB171 allows reducing the noise that is generated in the pressure regulator during the lamination process. Its efficiency is due to the fact that noise reduction takes place at the...
Biological methanation uses microorganisms in their natural forms, and no rare material, to turn H2 and CO2 into e-methane. The technology itself its 100% green. Our biological methanation solutions require minimum pre-treatments compared to more traditional technologies and generate e-methane thanks to controlled biological...
Fiosonic Mini is Pietro Fiorentini’s industrial ultrasonic gas flow meter designed for custody transfer applications in gas distribution networks. Its multi-path chordal technology provides real-time diagnostics, high accuracy, and redundancy. Fiosonic Mini is suitable for use with dry gases and is also Hydrogen Ready for NG-H2 blending...
The WLR meter has been developed by Pietro Fiorentini to offer to the users a dedicated product to complete the range of metering solutions. It is a modular, inline system, providing real-time measurements of water content in a multiphase flow. The sensor...
SSM-Aquo NB-IoT is a remote-reading ultrasonic water meter with integrated communication module, offering a compact design for the residential sector. Using static technology, it has no moving parts subject to wear and tear, and guarantees constant high accuracy over time,...
See more Solutions
A complete range of products, systems and services to provide our clients with comprehensive end-to-end solutions. At Pietro Fiorentini, we have the expertise and know-how to guarantee presence and competence at every stage of the process and high-value solutions.
Your message has been received correctly, we will contact you soon.
Protection of intellectual property The Pietro Fiorentini platforms/portals and all their content, including but not limited to, logos, icons, brands, text, graphics, photographs, images, moving images, audio, illustrations, technical and commercial information, and software (hereinafter “Portal Content”), are and shall...
The energy industry spans the entire globe, and there are dozens of steps that involve various players of the value chain. From the companies that extract oil and natural gas (both on land and at sea) to the renewable energy...
With more than 80 years of experience and a corporate culture based on continuous improvement, we are constantly looking for new ways forward. A considerable part of our investments is aimed at developing technological solutions that can open new frontiers...
THE STORY: FROM ITALIAN FAMILY BUSINESS TO MULTINATIONAL COMPANY Pietro Fiorentini SpA was founded in Italy in 1940. Today, in addition to its headquarters in Arcugnano (Vicenza), the Pietro Fiorentini Group has 40 commercial and production sites, both in Italy and...
See more Company
As announced a few months ago, Pietro Fiorentini has entered the share capital of SPI Consulting, a Desenzano del Garda (Brescia)-based startup operating in the renewable energy sector. SPI Consulting offers solutions for the generation of green hydrogen through the...
Less than a year after joining the Pietro Fiorentini Group, the start-up MicroPyros BioenerTec continues its growth. A path that will lead it to become an international reference for solutions based on biotechnology for Power-to-gas and syngas methanation processes. To...
With the innovative electrolyzer supplied by Hyter, a company part of the Pietro Fiorentini Group, PLT energia will be able to use green hydrogen as an energy vector to make its offices even more sustainable. PLT energia has been presiding over the entire value chain of...
Pietro Fiorentini Group has supplied the pressure reduction and metering station and the blending plant for the first hydrogen-fuelled powerhouse in the whole China: The Green Power Plant in Jingmen, Hubei. Coordinated by SPIC, State Power Investment Corporation, one of the country’s leading power generation companies,...
On the 25th of May 2022, a new plant for biogas upgrading and injection of biomethane into the network was inaugurated in Cella Dati, in the province of Cremona. It has been entirely designed, manufactured, and installed by Pietro Fiorentini Group. Completed within twelve...
On Friday 21st of July 2023 in Straubing, Germany, the first and only research and testing plant in Europe for biomethanation was inaugurated: Bio FARM. Located within the Straubing water purification center and operated by Straubinger Entwässerung und Reinigung (SER), Bio FARM takes advantage of its...
On the 15th of December 2022, the first hydrogen blending station built and installed by Pietro Fiorentini was officially inaugurated. Commissioned by Gasvalpo, the oldest gas distribution company of Chile and one of the most important in South America, the station is part...
The Hera Group, one of Italy’s largest multi-utility companies, presents its innovative “power to gas” plant named SynBioS (Syngas Biological Storage) at the Gastech exhibition in Milan, an event dedicated to the energy sector. This plant will be able to convert renewable electricity and...
Environmental sustainability, social development and transparent management are the three pillars of Pietro Fiorentini Group, which is once again pleased to announce the publication of its Sustainability Report 2022. The Group is investing more and more in the future with innovation projects concerning energy efficiency, sustainable resource...
Banco BPM has recently finalised a 20 million euro loan for the Pietro Fiorentini Group. The credit line will allow the Group to reduce energy consumption and rely on renewable sources, further improving its attention to environmental issues within its production. The...
A few days ago, the Pietro Fiorentini Group and Hududgazta’minot JSC signed an important agreement as part of the project to modernise and digitalise Uzbekistan’s gas transmission and distribution network. The agreement involves the realisation by Pietro Fiorentini of 5,434 smart...
Installation of a biogas cleaning system in Lithuania by Biokomp, a PF Group company, in collaboration with the Politecnico di Torino. The cryogenic system was developed to fully remove siloxanes, VOC and partially remove H2S in a real biogas site...
The Pietro Fiorentini Group is going one step further in the hydrogen sector: supplying ball valves suitable for use with hydrogen mixtures up to 100%. The Group will participate in the construction of the European hydrogen backbone in Greece by supplying ball valves...
Find us at www.fiorentini-polska.com Our current and potential clients will find here information not only about our branch in Poland and the entire Pietro Fiorentini Group, but also contacts and useful information about the services and solutions we offer. Discover...
Pietro Fiorentini’s Technical Assistance Service offers the option of installing silencers on Pietro Fiorentini regulators to significantly reduce installation noise. In many installations, we encounter high noise levels, mainly due to high flow rates, as well as the high gas velocity reached in certain...
Micropyros, a brand of the Fiorentini Group, is one of only three companies in the world that have industrially developed the microorganisms that are the basis of biological methanation. MioLAB is the laboratory of Micropyros designed for the growth and...
In 2022, Pietro Fiorentini designed, built and installed the upgrading and injection plant in Cella Dati (Cremona) for the Egea Group and Santini Agricoltura Rinnovabile. In operation since March, the system injects biomethane produced from livestock manure and plant biomass...
Biokomp, a Pietro Fiorentini Group company, is one of the leading producers of complete packages for natural gas, biogas, biomethane, air and process gas compression & treatment plants of all sizes as well as special components. The Pietro Fiorentini Group...
A fundamental part of Pietro Fiorentini's essence is based on developing technological solutions that open new frontiers, always focused on a more efficient and sustainable world. As a leading figure in the energy transition, we develop innovative technologies and projects...
Hyter manufactures a range of electrolysers using an innovative technology: AEMWE anion exchange membranes. This solution guarantees a significant series of technical and environmental advantages, as well as a reduction in the costs of plant management. Based in Desenzano del...
On 28 July 2022, work started on the installation of a dedicated solution from MicroPyros BioEnerTec, Hyter, Biokomp and Pietro Fiorentini at the wastewater treatment plant in Straubing (Germany). All the companies involved in the design, construction and installation of the...
Check out the PF solutions for renewable energies. Visit here the catalogue dedicated to Renewable Energy Solutions, download it on this link or send it directly to your mobile phone using the image QR code.
The energy transition is based on using a clean energy mixture, including hydrogen. In response to this growing market need, Pietro Fiorentini has developed and tested a specific range of products ready to work with 100% hydrogen. We are applying our...
Pietro Fiorentini will be present at the European Biomethane Week, celebrated in Brussels from 21 to 25 October 2024. The second edition of the European Biomethane Week “On your marks, get set… grow! Biogases: the pragmatic pathway to climate-neutrality” will offer multiple opportunities...
The eighth edition of the Festival dell'acqua was held in Florence on 25th and 26th September. The event, which has been held every two years since 2011, has become a benchmark in the water sector, a sector that is currently...
Ecomondo brings together all sectors of the circular economy: from eco-design to the re-use and valorisation of raw materials and energy, from the remediation of contaminated sites to the regeneration of areas at hydrological risk.
The largest business and knowledge platform in Latin America for the oil, gas and biofuels industry: the entire production chain of the sector will be part of the event that integrates companies of all segments.
The Abu Dhabi International Petroleum Exhibition & Conference is the world’s foremost meeting place. Oil, gas and energy companies convene to engage and identify the opportunities that will unlock new value in an evolving energy landscape.
Valve World Expo is one of the leading exhibitions for industrial valves and related accessories, uniting the entire world of valve technology under one roof.
Variable electricity from renewables, such as wind, can be stored long term in the form of gases like hydrogen and biomethane.Processes like Power-to-Gas and Power-to-Methane make this possible.Visit the stand of Micropyros at A334 in Hall A2 from 27th to...
The Renewable Gas Exhibition will showcase the latest technology and innovations for producing biogas, biomethane and other renewable gases. Pietro Fiorentini will be present on: Hall 2, Stand 236.
The 8th International LNG Congress will cover all the hot topics of the LNG industry. From liquefaction, LNG Storage and Transportation to the questions of LNG usage as a fuel, developing LNG infrastructure and LNG to end users.
At Gastech convene policy makers, industry leaders, disruptors and innovators to drive conversation, collaboration and connections and to address the changes during the energy transition towards a decarbonised and sustainable environment.
Enlit is a community that collaborates and innovates to solve the most pressing energy-related issues. At the European edition, it will come together in an online to develop a plan to address the challenges of Europe’s energy transition.
Pietro Fiorentini is therefore pleased to announce the launch of the virtual event Net-Zero: the biomethane journey – Paving the way to a greener future, that will be held on Clevercast platform on Thursday 25th of May 2023 at 3 p.m.
Biogas – a new opening. This is the slogan of this year's eighth edition of the Biogas Congress. One of the largest conferences in Europe addressed to the biogas sector will be held on December 14-15, 2023 in Warsaw, where...
HYDROGEN EXPO is the first Italian exhibition & conference entirely dedicated to the technological sector for the development of the hydrogen supply chain.
The fourth SALÓN DEL GAS RENOVABLE will be held on October 1-2 in Valladolid (Spain). The exhibiting companies will have the opportunity to actively participate in the congress sessions, conferences and networking activities with the professionals who will attend the...
The European Biomethane Week is a must event for producers, users, investors and legislators involved in the deployment of biogases across Europe. The second edition of the European Biomethane Week “On your marks, get set… grow! Biogases: the pragmatic pathway...
Enlit is a community that collaborates and innovates to solve the most pressing energy-related issues. At the European edition, it will come together in an online to develop a plan to address the challenges of Europe’s energy transition.
Hydrogen Technology Expo Europe is the must-attend conference and exhibition that is exclusively dedicated to discussing advanced technologies for the hydrogen and fuel cell industry. The event will bring together the entire hydrogen value chain to focus on developing solutions...
Ecomondo brings together all sectors of the circular economy: from eco-design to the re-use and valorisation of raw materials and energy, from the remediation of contaminated sites to the regeneration of areas at hydrological risk.
We will be present at the Gas Technology Fair EXPO-GAS next April 8-10th. The largest and most significant event in the industry in Poland. Find us at the stand 5-B21. Targi Kielce. More info and free tickets at the link.
See more News & Events
A complete range of products, systems and services to provide our clients with comprehensive end-to-end solutions. At Pietro Fiorentini, we have the expertise and know-how to guarantee presence and competence at every stage of the process and high-value solutions.
Your message has been received correctly, we will contact you soon.
Protection of intellectual property The Pietro Fiorentini platforms/portals and all their content, including but not limited to, logos, icons, brands, text, graphics, photographs, images, moving images, audio, illustrations, technical and commercial information, and software (hereinafter “Portal Content”), are and shall...
The energy industry spans the entire globe, and there are dozens of steps that involve various players of the value chain. From the companies that extract oil and natural gas (both on land and at sea) to the renewable energy...
Pietro Fiorentini Polska is a young company, but in addition to being backed by Pietro Fiorentini, a world leader in the energy industry, it is proud to be made up of magnificent professionals with extensive experience in the sector. The...
With more than 80 years of experience and a corporate culture based on continuous improvement, we are constantly looking for new ways forward. A considerable part of our investments is aimed at developing technological solutions that can open new frontiers...
A cornerstone of the energy transition Biomethane plays a considerable role. Unlike other renewable sources, it requires limited investment in terms of infrastructure and, regarding emissions, is considered to be neutral as it is produced via the digestion of biomass...
In 2022, it was designed, built and installed the upgrading and injection plant in Cella Dati (Cremona) for the EGEA Group and Santini Agricoltura Rinnovabile. In operation since March, the system injects biomethane produced from livestock manure and plant biomass...
Solutions along the biomethane supply chain From treating raw biogas to the injection of the biomethane into the grid for the granting of incentives or for the production of liquefied natural gas (LNG), Pietro Fiorentini is able to autonomously create...
The perfect ally for sustainable energy Hydrogen is an element that can currently only be injected into the pipeline network and mixed with natural gas up to certain percentages. Our commitment is to create systems and devices that increase this...
Pietro Fiorentini’s contribution to the hydrogen chain Pietro Fiorentini began its hydrogen-journey in December 2018, by taking part in the Hy4Heat project conference in London. The United Kingdom has stated its goal to become fossil fuel independent by 2050 and...
Serving renewables Power-to-gas (P2G) transforms surplus electricity into green molecules that can be transported over long distances at low cost with less and less leakage. At the same time, it offers the option of seasonal storage for renewable energy, to...
The development of power-to-gas solutions is part of the process of facilitating the energy transition in which the Pietro Fiorentini Group is engaged, strengthened by its experience in the world of natural gas and as a point of reference in...
Self-regulating grids Active systems that integrate different types of energy and make decisions autonomously to optimise energy distribution. Smart Grids are an ambitious project thanks to which, in the very near future, energy will be distributed through networks capable of...
The implementation of the smart grids of the future requires the continued development of systems that are compatible with renewable sources and solutions that are capable of interacting with one another. Faced with such a complex scenario, Pietro Fiorentini has...
The most effective evolution in network monitoring As specialists in smart metering, we focus on the water sector with one main objective, the optimisation of distribution networks. The President of the Fiorentini Group, Cristiano Nardi, explains Pietro Fiorentini's commitment to...
Within the Pietro Fiorentini Group there are many companies that develop solutions for the water sector; these solutions allow us to provide complete and integrated services to our clients. The challenges posed by today's world require solutions in which hardware...
A GAS, MANY ADVANTAGES FOR COMMUNITIES As part of an energy-efficient and zero-emission pathway, natural gas will be increasingly complemented by the production of biogas and biomethane, which is considered as one of the resources that will contribute most to...
Within the water cycle coexist a wide number of different and complex systems, requiring thousands of control points and simple installations of valves or sensors, characterized by a limited but important number of signals. Therefore, automation tools (PLC, SCADA, DCS)...
While mechanical water meters measure the volume of water used by end-users in an analogue way and give very limited information focused on consumption, subject to continuous wear of moving parts, ultrasonic water meters do wear-free static ultrasonic metering, providing useful real-time flow rate...
LEADING THE WAY IN ENERGY TRANSITION PROCESS On October 20, 2022, the virtual grand opening event of the Hydrogen Innovation Lab was held. This project saw the building of a multifunctional facility where hydrogen can be produced by electrolysis and used, where...
ONE ELEMENT, DIFFERENT WAYS TO PRODUCE IT Hydrogen is the most abundant element in the universe, however on our planet we only find it bound to other elements, such as oxygen or carbon. In fact, it is called an energy vector,...
Power-to-gas technology exploits the phenomenon of electrolysis: excess energy from wind farms, photovoltaic fields and electrical infrastructure congestion is used to break the bonds of the water molecules and produce hydrogen. Green hydrogen can be upgraded on site where there is consumption, for example in...
80 years of experience in processing natural gas combined with our commitment to the process of decarbonisation has driven us to develop complete power-to-gas solutions. From pure hydrogen injection systems after blending to the development of hydrogen-ready network solutions, we...
By joining the Green Deal, the European Union has committed to reducing net greenhouse gas emissions to zero by 2050, with intermediate targets for 2030 and 2040. The action plan includes both the promotion of the efficient use of resources by moving towards...
Pietro Fiorentini has been actively researching and developing new solutions that can be used in smart grids for years now, especially the natural gas grids. Current gas distribution networks have a significant limitation: they are subject to expected leakage, particularly at the...
FROM BIOGAS TO BIOMETHANE Biogas is mostly made up of methane (between 50-70%) and is produced by the digestion of organic waste from agricultural biomass (dedicated crops, by-products, agricultural waste and animal manure), agro-industrial biomass (waste from the food processing chain), industrial processing...
Boosting steelmaking efficiency: In order to use the process gas into a 2MW steam boiler, we have recently supplied a gas booster with knock-out drum for fine filtration of solid contaminants and temperature control system to cool the gas at...
Pioneers in biomethane production: Biokomp has provided the biogas treatment and compression for the first biomethane plant in Italy already in 2014. Our systems can be applied to different upgrading technologies (membrane, scrubbing, PSA) as well as direct injection of biomethane into...
Biokomp offers a wide range of gas processing systems for microturbine applications with capacities ranging from 5 Nm3/h per hour to 5.000 Nm3/h. Our clean-up, dewatering and compression units are designed to operate with several fuel types (Natural gas, Wellhead gas, Associated Petroleum...
Our compressor series for CHP gas engines stands out for reliability, high efficiency, and easy maintenance, making them a perfect fit for your power generation project. Discover the unique advantages of Biokomp compressors, which combine high quality materials and special coatings to...
A GREEN HYDROGEN PLANT FOR PLT ENERGIA THANKS TO THE HYTER ELECTROLYSER With the innovative electrolyzer supplied by Hyter, a company part of the Pietro Fiorentini Group, PLT energia will be able to use green hydrogen as an energy vector to make its offices even...
THE SIRIUS PROJECT LED BY HYTER IS AMONG THE WINNERS OF THE MITE CALL FOR PROPOSALS ON HYDROGEN RESEARCH Hyter was recently awarded one of MiTE’s calls for tenders with the Sirius project, which involves the construction within three years...
RENEWABLE ENERGY QUEENS CONQUER GERMANY: WORK STARTS ON STRAUBING PILOT PLANT On the 28th of July, 2022, at the Straubing wastewater treatment plant in Germany, the work to install a specific solution by MicroPyros BioEnerTec, Hyter, Biokomp and Pietro Fiorentini to research and experiment with biomethanation processes...
Renewable fuels to reduce carbon emissions E-fuels are non-fossil, renewable fuels produced by means of an artificial chemical synthesis process using renewable sources. The process converts a gas made of electrolytic hydrogen (H2) and a carbon containing molecule, such as carbon dioxide (CO2) coming...
THE STORY: FROM ITALIAN FAMILY BUSINESS TO MULTINATIONAL COMPANY Pietro Fiorentini SpA was founded in Italy in 1940. Today, in addition to its headquarters in Arcugnano (Vicenza), the Pietro Fiorentini Group has 40 commercial and production sites, both in Italy and...
See more Other Pages
Please turn to portrait
for a better experience
